Deployment Architectures (Exposing Envoy)

To make Aegis and Envoy accept real public traffic, you need to expose Envoy's ports (Host 80/443) to the internet. Depending on your network setup (home lab, static IP, CGNAT, VPS), you should choose one of the two main architectures below.

Architecture A: Direct Exposure (Home Router / Static IP)

Use this if you have a public IPv4 address (either static or dynamically updated via DDNS) and access to your home router.

.svg)

1. How to configure it:

1. Static IP / DDNS: Ensure your router has a public WAN IP. If it's dynamic, configure a Dynamic DNS (DDNS) service (e.g., No-IP, DuckDNS) so your domain always points to your home IP.
2. Router Port Forwarding: Open your home router's admin panel and configure Port Forwarding:
   • Forward external TCP port 80 to your host machine's IP on port 80.
   • Forward external TCP port 443 to your host machine's IP on port 443.
3. Aegis UI Listener Config:
   • Your HTTP listener must bind to port 10080 (mapped to 80 on the host).
   • Your HTTPS listener must bind to port 10443 (mapped to 443 on the host).
   • Do NOT enable PROXY Protocol on your listeners.

Architecture B: VPS Relay Tunnel (Recommended for CGNAT / Privacy)

Use this if you are behind CGNAT (cannot port forward), do not have a public IPv4, or want to hide your home public IP for privacy/DDoS protection.

.svg)

The Client IP Preservation Problem (Crucial for AI Threat Analysis)

If you use a VPS to proxy traffic to your home Envoy (e.g., using standard Nginx reverse proxy or simple port forwarding), Envoy will see all incoming traffic as originating from the VPS's internal tunnel IP (e.g., 10.0.0.1), rather than the real client's IP.

[!WARNING] Why this is dangerous in Aegis: If an attacker launches a web exploit, Aegis's AI Threat Engine will detect the attack and automatically block the offending IP. If the client IP is not preserved, Aegis will block your VPS tunnel IP, instantly shutting down ALL public traffic to your gateway!

How to solve it (PROXY Protocol):

To preserve the real client IP across the tunnel, you must use the PROXY Protocol on both your VPS forwarder and your home Envoy listeners.

1. Configure the VPS (Nginx Stream Proxy example):

On your VPS, use Nginx's stream module (TCP layer forwarding) with proxy_protocol on enabled:

stream {
    upstream home_envoy_https {
        server 10.0.0.2:443; # Home WireGuard IP
    }

    server {
        listen 443;
        proxy_pass home_envoy_https;
        proxy_protocol on; # THIS IS CRUCIAL! Prepends client IP header
    }
}

2. Configure the Home Envoy (Aegis UI):

1. Open the Aegis Dashboard -> Gateway -> Listeners.
2. Edit your https_listener (port 10443).
3. Under Listener Filters, add the Proxy Protocol filter (envoy.filters.listener.proxy_protocol).
4. Save and Sync.

This tells Envoy to expect and parse the PROXY protocol header prepended by the VPS, restoring the real client's IP. Aegis's AI engine can now correctly profile and block individual attackers without affecting legitimate users.

Architecture C: Cloudflare Tunnel (HTTP Header IP Restoration)

Use this if you want to expose your gateway without port forwarding and benefit from Cloudflare's DDoS protection, CDN, and WAF.

.svg)

The Client IP Preservation Problem (Headers vs. PROXY)

Unlike Nginx stream relays which forward TCP packets directly, Cloudflare Edge acts as an HTTP reverse proxy and terminates the SSL connection. By default, Cloudflare does not use the PROXY Protocol (unless you are on an Enterprise plan).

Instead, Cloudflare injects standard HTTP headers containing the client's real IP before forwarding the request over the tunnel to your local cloudflared daemon:

• CF-Connecting-IP (contains the real client's IP, e.g., 1.2.3.4).
• X-Forwarded-For (contains the client IP + proxy IPs).

[!WARNING] Why this is dangerous in Aegis: If you do not configure Envoy to extract the real client IP from these HTTP headers, Envoy will see all traffic as originating from the local cloudflared container's internal IP (e.g., 172.20.0.5). If Aegis's AI Threat Engine auto-blocks an attacker, it will block the cloudflared container IP, instantly taking your entire gateway offline!

How to solve it (HTTP Header Extraction):

To preserve the client IP in a Cloudflare setup, you must configure Envoy's HttpConnectionManager filter (via the Aegis UI) to extract the client IP from Cloudflare's custom header.

1. Configure the Home Envoy (Aegis UI):

1. Open the Aegis Dashboard -> Gateway -> Listeners.
2. Edit your https_listener (or http_listener if cloudflared terminates SSL and forwards plain HTTP to Envoy).
3. Under the HTTP Connection Manager filter settings:
   • Set use_remote_address to true.
   • Enable xff_num_trusted_hops and set it to 1 (this tells Envoy to trust the X-Forwarded-For header sent by cloudflared).
   • (Alternatively) Configure the CF-Connecting-IP header extraction filter (using custom Envoy Lua or Header-to-Metadata extensions supported by Aegis) to override the downstream address with the value of the CF-Connecting-IP header.
4. Save and Sync.

This ensures Envoy correctly reports the actual client's IP (1.2.3.4) in the access logs sent to Aegis, allowing the AI Threat Engine to block attackers individually while keeping your Cloudflare Tunnel connection fully operational.