�x��x�xxx�x�x ����binarESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x28 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2810,len:0x15a0
load:0x403c8700,len:0x4
load:0x403c8704,len:0xd20
load:0x403cb700,len:0x2f00
entry 0x403c8928
[0;32mI (27) boot: ESP-IDF v5.4.1-dirty 2nd stage bootloader[0m
[0;32mI (27) boot: compile time Jul 27 2025 19:17:01[0m
[0;32mI (27) boot: Multicore bootloader[0m
[0;32mI (28) boot: chip revision: v0.2[0m
[0;32mI (30) boot: efuse block revision: v1.3[0m
[0;32mI (34) boot.esp32s3: Boot SPI Speed : 80MHz[0m
[0;32mI (38) boot.esp32s3: SPI Mode : DIO[0m
[0;32mI (42) boot.esp32s3: SPI Flash Size : 2MB[0m
[0;32mI (45) boot: Enabling RNG early entropy source...[0m
[0;32mI (50) boot: Partition Table:[0m
[0;32mI (52) boot: ## Label Usage Type ST Offset Length[0m
[0;32mI (59) boot: 0 nvs WiFi data 01 02 00009000 00006000[0m
[0;32mI (65) boot: 1 phy_init RF data 01 01 0000f000 00001000[0m
[0;32mI (72) boot: 2 factory factory app 00 00 00010000 00100000[0m
[0;32mI (78) boot: End of partition table[0m
[0;32mI (82) esp_image: segment 0: paddr=00010020 vaddr=3c030020 size=0d178h ( 53624) map[0m
[0;32mI (99) esp_image: segment 1: paddr=0001d1a0 vaddr=3fc93200 size=02df8h ( 11768) load[0m
[0;32mI (101) esp_image: segment 2: paddr=0001ffa0 vaddr=40374000 size=00078h ( 120) load[0m
[0;32mI (104) esp_image: segment 3: paddr=00020020 vaddr=42000020 size=2047ch (132220) map[0m
[0;32mI (135) esp_image: segment 4: paddr=000404a4 vaddr=40374078 size=0f09ch ( 61596) load[0m
[0;32mI (148) esp_image: segment 5: paddr=0004f548 vaddr=600fe100 size=0001ch ( 28) load[0m
[0;32mI (155) boot: Loaded app from partition at offset 0x10000[0m
[0;32mI (155) boot: Disabling RNG early entropy source...[0m
[0;32mI (166) cpu_start: Multicore app[0m
[0;32mI (175) cpu_start: Pro cpu start user code[0m
[0;32mI (175) cpu_start: cpu freq: 160000000 Hz[0m
[0;32mI (175) app_init: Application information:[0m
[0;32mI (175) app_init: Project name: rc-car[0m
[0;32mI (179) app_init: App version: 1[0m
[0;32mI (183) app_init: Compile time: Jul 27 2025 19:47:55[0m
[0;32mI (188) app_init: ELF file SHA256: a3b9f7d05...[0m
[0;32mI (192) app_init: ESP-IDF: v5.4.1-dirty[0m
[0;32mI (196) efuse_init: Min chip rev: v0.0[0m
[0;32mI (200) efuse_init: Max chip rev: v0.99 [0m
[0;32mI (204) efuse_init: Chip rev: v0.2[0m
[0;32mI (208) heap_init: Initializing. RAM available for dynamic allocation:[0m
[0;32mI (214) heap_init: At 3FC97250 len 000524C0 (329 KiB): RAM[0m
[0;32mI (219) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM[0m
[0;32mI (225) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM[0m
[0;32mI (230) heap_init: At 600FE11C len 00001ECC (7 KiB): RTCRAM[0m
[0;32mI (236) spi_flash: detected chip: generic[0m
[0;32mI (239) spi_flash: flash io: dio[0m
[0;33mW (242) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.[0m
[0;32mI (254) sleep_gpio: Configure to isolate all GPIO pins in sleep state[0m
[0;32mI (260) sleep_gpio: Enable automatic switching of GPIO sleep configuration[0m
[0;32mI (267) main_task: Started on CPU0[0m
[0;32mI (285) main_task: Calling app_main()[0m
This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision v0.2, 2MB external flash
Minimum free heap size: 382804 bytes
[0;32mI (289) APP_MAIN: Minimum free heap size: 382804 bytes[0m
[0;32mI (294) JUMP_BIRD_QUEUE: xJumpBirdGameInputQueue created successfully.[0m
[0;32mI (300) APP_MAIN: xJumpBirdGameInputQueue created successfully.[0m
[0;32mI (306) APP_MAIN: LED control queue created successfully.[0m
[0;32mI (311) APP_MAIN: Attempting to start display task...[0m
[0;32mI (316) DISPLAY_TASK: Creating display mutex...[0m
[0;32mI (320) DISPLAY_TASK: Display mutex created. Initial give.[0m
[0;32mI (325) DISPLAY_TASK: Display Manager Task started.[0m
[0;32mI (331) DISPLAY_TASK: Display task created.[0m
[0;32mI (331) SSD1306: OLED configured successfully[0m
[0;32mI (338) APP_MAIN: Display task created successfully.[0m
[0;32mI (343) APP_MAIN: Attempting to start LED control task...[0m
[0;32mI (348) gpio: GPIO[41]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 [0m
[0;32mI (356) LED_TASK: LED Control Task started. Waiting for signals...[0m
[0;32mI (362) LED_TASK: LED Control task created successfully![0m
[0;32mI (367) APP_MAIN: LED control task created successfully.[0m
[0;32mI (372) APP_MAIN: Attempting to start button monitor task...[0m
[0;32mI (378) gpio: GPIO[37]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 [0m
[0;32mI (386) BUTTON_TASK: Button Monitor Task started. Monitoring GPIO 37 for Jump Bird game input.[0m
[0;32mI (394) BUTTON_TASK: Button Monitor task created successfully